EMI/EMC Near Field Measurement Setup

Home Facilities EMI/EMC Near Field Measurement Setup

Make: Anritsu

Model: MS2711E, 2000-1792-R

Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I, Spectral Emission Mask, PIM Hunting

  • Interference Analysis of cellular system, land mobile radio systems, Wi-Fi.
  • Transmitter Spectrum Analysis - occupied bandwidth, channel power, field strength, Adjacent Channel Power Ratio, AM/FM demod, Carrier-to-Interference Ratio.
  • Received Signal strength (RSSI) - location and identification of in-band interference and out-of-band spurious signals; modulation identification, and spectral masks
  • Measure signal strength of single or multiple emitters.
  • Calculate total radiation received over frequency span of spectrum analyzer and antenna.

Room No.: 145
First Floor
Technology Tower
Microwave Engineering Lab
School of Electronics Engineering

Dr. Yogesh Kumar Choukiker,
Associate Professor,
Department of Communication Engineering,
School of Electronics Engineering (SENSE),
VIT, Vellore, TN-632014.
Email: sense.emc@vit.ac.in
Phone: 0416-2202448